Come usare il Simple Wifi RS232 modem con il computer HAL9000?
Questa è la domanda che mi viene fatta più spesso: vorrei usare il tuo modem su questo computer, come posso fare? E’ difficile dare sempre una risposta: ogni computer ha le sue caratteristiche e peculiarità, molti non hanno nemmeno una porta seriale standard!

Se lo usate su un computer che non è presente mandatemi che software avete usato e come avete fatto, lo inserirò nella lista (in ordine alfabetico). Tenete presente che, dove c’è una porta seriale RS232, il modem funziona sempre.
Ho ricevuto messaggi che è stato usato su tantissimi computer. Le istruzioni e i video qui inseriti sono solo alcuni!

Apple II GS (but also Macintosh 68k and IIc+)
Apple II GS, Macintosh 68k and  IIc+ have a serial port with a Mini DIN-8 connector instead of a standard DB9-DB25 connector. You need a custom cable (you can see the pin out after the video). On the Apple II i use Proterm 3.1 for terminal program, on the Mac “Mac Cincy”.
In this video at the All About Apple musem i show the Simple Wifi Modem with an Apple IIGS and a  Macintosh SE.

 

Mini DIN-8 IIgs Serial Port (also IIc+ and Macintosh)

The IIgs serial port is numbered as follows, looking at the back
of the computer:

Mini-Din 8
IIgs Serial Port
(Female) Socket

8 7 6
5 4 3
2 1

Pin Signal Name and Description*

1 HSKo Handshake output. Driven uninverted from the
SCC’s /DTR output.
Voh = 3.6V; Vol = -3.6V; Rl – 450 ohms
2 HSKi Handshake input or external clock. Received
inverted at SCC’s /CTS and /TRxC inputs.
Vih = 0.2V; Vil = -0.2V; Ri = 12K ohms
3 TxD- Transmit data (inverted). Driven inverted
from SCC’s TxD output; tri-stated when SCC’s
/RTS is not asserted.
Voh = 3.6V; Vol = -3.6V; Rl = 450 ohms
4 GND Signal ground. Connected to logic and
chassis ground.
5 RxD- Receive data (inverted). Received inverted
at SCC’s RxD input.
Vih = 0.2V; Vil = -0.2V; Ri = 12K ohms
6 TxD+ Transmit data. Driven uninverted from SCC’s
TxD output; tri-stated when SCC’s /RTS is not
asserted.
Voh = 3.6V; Vol = -3.6V; Rl = 450 ohms
7 GPi General-purpose input. Received inverted at
SCC’s /DCD inputs.
Vih = 0.2V; Vil = -0.2V; Ri = 12K ohms
8 RxD+ Receive data. Received uninverted at SCC’s
RxD input.
Vih = 0.2V; Vil = -0.2V; Ri = 12K ohms

Note: Absolute values of specified voltages are minimums;
Ri is a minimum, Rl is a maximum.

*from IIgs tn030 1990 J. Luther & R. Reynolds

Commodore AMIGA
In every Commodore Amiga there is a standard DB25 serial port. Just connect utti i computer Amiga hanno una seriale DB25 standard. Basta quindi collegare il modem e caricare un programma di terminale per collegarsi (ad esempio NCOMM).