<\/p>\n\n\n\n
Come usare il Simple Wifi RS232 modem con il computer HAL9000? Se lo usate su un computer che non \u00e8 presente mandatemi che software avete usato e come avete fatto, lo inserir\u00f2 nella lista (in ordine alfabetico). Tenete presente che, dove c’\u00e8 una porta seriale RS232, il modem funziona sempre. Apple II GS (but also Macintosh 68k and IIc+)<\/strong> <\/p>\n Mini DIN-8 IIgs Serial Port (also IIc+ and Macintosh)<\/p>\n The IIgs serial port is numbered as follows, looking at the back Mini-Din 8 8 7 6 Pin Signal Name and Description*<\/p>\n 1 HSKo Handshake output. Driven uninverted from the Note: Absolute values of specified voltages are minimums; *from IIgs tn030 1990 J. Luther & R. Reynolds<\/p>\n\n\n\n Commodore AMIGA<\/strong>
<\/strong>Questa \u00e8 la domanda che mi viene fatta pi\u00f9 spesso: vorrei usare il tuo modem su questo computer, come posso fare? E\u2019 difficile dare sempre una risposta: ogni computer ha le sue caratteristiche e peculiarit\u00e0, molti non hanno nemmeno una porta seriale standard!<\/p>\n
Ho ricevuto messaggi che \u00e8 stato usato su tantissimi computer. Le istruzioni e i video qui inseriti sono solo alcuni!<\/p>\n\n\n\n
Apple II GS, Macintosh 68k and IIc+ have a serial port with a Mini DIN-8 connector instead of a standard DB9-DB25 connector. You need a custom cable (you can see the pin out after the video). On the Apple II i use Proterm 3.1 for terminal program, on the Mac “Mac Cincy”.
In this video at the All About Apple<\/a> musem i show the Simple Wifi Modem with an Apple IIGS and a Macintosh SE.<\/p>\n
of the computer:<\/p>\n
IIgs Serial Port
(Female) Socket<\/p>\n
5 4 3
2 1<\/p>\n
SCC’s \/DTR output.
Voh = 3.6V; Vol = -3.6V; Rl – 450 ohms
2 HSKi Handshake input or external clock. Received
inverted at SCC’s \/CTS and \/TRxC inputs.
Vih = 0.2V; Vil = -0.2V; Ri = 12K ohms
3 TxD- Transmit data (inverted). Driven inverted
from SCC’s TxD output; tri-stated when SCC’s
\/RTS is not asserted.
Voh = 3.6V; Vol = -3.6V; Rl = 450 ohms
4 GND Signal ground. Connected to logic and
chassis ground.
5 RxD- Receive data (inverted). Received inverted
at SCC’s RxD input.
Vih = 0.2V; Vil = -0.2V; Ri = 12K ohms
6 TxD+ Transmit data. Driven uninverted from SCC’s
TxD output; tri-stated when SCC’s \/RTS is not
asserted.
Voh = 3.6V; Vol = -3.6V; Rl = 450 ohms
7 GPi General-purpose input. Received inverted at
SCC’s \/DCD inputs.
Vih = 0.2V; Vil = -0.2V; Ri = 12K ohms
8 RxD+ Receive data. Received uninverted at SCC’s
RxD input.
Vih = 0.2V; Vil = -0.2V; Ri = 12K ohms<\/p>\n
Ri is a minimum, Rl is a maximum.<\/p>\n
In every Commodore Amiga there is a standard DB25 serial port. Just connect utti i computer Amiga hanno una seriale DB25 standard. Basta quindi collegare il modem e caricare un programma di terminale per collegarsi (ad esempio NCOMM).<\/p>\n